PHD2 can't manage to connect the mount. was created by Laurent 4 years 7 months ago #53243 Hi all, I try to use PHD2 alone to check perriodic errror of my mount, but PHD2 doen't detect the driver of …

Even trying to start Phd2 from ekos, PHD2-mount connection fails. Mount connection window in Phd2 shows that indi is connected . When the indi button is clicked it loads all the indi properties including …

Well, in PHD2, I was selecting my QHY5 as my camera and it has to be INDI Camera and INDI Mount in the camera and mount settings. He started INDI server first with the normal connections (I'm using …

My problem is that each capture, the EKOS guide module indicates that the star is lost and resets guiding, although is not visible at PHD2, everything is fine. I set the dithering value at 4 pixel but after …

Astroberry PHD2 Lodestar was created by sergio 3 years 10 months ago - 3 years 10 months ago #64500

Replied by Rob Lancaster on topic PHD Guiding Setup Connection Problem 5 years 11 months ago #31807 Phd2 should not prevent the INDI Server from connecting whether it is working or not

Getting Started with INDI This guide provides a comprehensive introduction to INDI (Instrument-Neutral Distributed Interface), a protocol and framework for controlling astronomical equipment. It covers the …

In PHD2, you can configure which cameras and mounts you are connected to and where the guide commands are sent. So if there is a problem with using the Skysensor when using PHD2, either …

Under what conditions would guiding be suspended? I'm using PHD: I have never set any parameters to having guiding suspended in PHD2, EKOS or INDI panels, yet,...

This property is meant for guider application (e.g. PHD2) and not intended to be used directly. Guiding Rate: Guiding Rate for RA & DE. 0.3 means the mount shall move at 30% of the sidereal rate when …